Diamondback Flooring sells and installs commercial flooring across metro Phoenix — tenant improvements, office suites, retail units, rentals and light industrial space. We are a licensed, bonded and insured Arizona company (ROC 311107), family-owned since 2012, and we work directly with property managers, brokers and general contractors as well as owner-operators.
What We Install Commercially
Luxury vinyl plank and tile, carpet tile and broadloom, and porcelain or ceramic tile, including removal of whatever is on the floor now. That range covers most tenant improvement scopes in the Valley, and it means one crew, one schedule and one point of contact instead of three trades who each blame the other when the handover slips.
We are an authorised dealer for Republic, American Flooring, Eternity, MSI, Dream Weaver and SK Flooring — products that carry the commercial traffic ratings and warranties a landlord or a specifier will ask about.
The Spaces We Are Asked For Most
Office and professional suites
Carpet tile in the work areas, LVT in reception and break rooms, tile in restrooms. Carpet tile is usually right for a leased suite because a stained or damaged square is replaced rather than the whole floor, and it can be lifted and re-laid when the tenant changes.
Retail and showroom units
These take the heaviest point loads of any commercial floor — pallets, fixtures, trolleys — so wear layer and substrate preparation matter more than the pattern. Between tenants the job is usually removal plus a fast, neutral finish that photographs well.
Rentals and multi-unit turns
Single-family rentals and small multi-family buildings are a repeating cycle rather than a one-off project: a unit turns, the floor has to be replaced quickly, and the same specification has to be repeatable across a portfolio. We price by unit so the number stays predictable.
Light industrial and back-of-house
Break rooms, corridors, offices inside a warehouse, and the transition where a hard-wearing finish meets a concrete slab. We will say plainly when a floor is not a flooring job at all — a failing slab needs repairing before anything is glued to it.
Working Around a Trading Business
Commercial work is scheduled around the tenant, not around us. In practice that means evenings, weekends, or the job split into phases so a section of the floor is always usable. We measure and quote by area so a phased job can be priced per phase, rather than one lump sum that has to be renegotiated the moment the schedule moves.
Dust control is part of scheduling, not an afterthought. In an occupied building, containment and dust-controlled removal are often what decide whether a job can run during business hours at all.
Choosing a Product for the Traffic
Commercial products are graded, and the grade is the first thing to agree before anyone talks about colour. Carpet tile carries a manufacturer traffic rating and a face weight; resilient products carry a wear layer measured in mils. A reception area, a corridor and a stockroom are three different floors even when they are on the same drawing.
The practical rule: specify for the busiest ten metres of the space, not the average. That is usually the entrance, the corridor that feeds it, and anywhere a trolley turns. Upgrading those and keeping the rest modest is how a commercial budget stays honest — and it is cheaper than replacing a worn entrance eighteen months later.
Where a cheaper product is the correct answer
A short-lease suite, a unit being prepared for sale, or a back-of-house corridor that will be covered by fixtures does not need the top of the range. We will say so. Selling a premium floor into a two-year lease is not good work, it is good commission.
Moisture and Substrate on a Commercial Slab
Almost every commercial floor in Phoenix goes down onto slab, and slab moisture is the failure mode that ruins the most installations. Manufacturers specify a maximum moisture emission for their adhesives and their products; we test the slab before installation rather than discovering the problem under a finished floor.
Flatness matters as much as moisture, particularly for large-format tile and for LVT with a rigid core. A slab that has been patched, cut for plumbing, or poured in phases is rarely flat within tolerance across a whole suite, and levelling is quoted before work starts rather than met as a surprise halfway through.
Commercial Tile Removal
Taking tile out of a commercial space is a dust and downtime problem before it is a flooring problem. We remove tile and thinset with dust-controlled equipment and containment, and the debris leaves site with us. On a large floor the removal is frequently the longest single item in the programme — which is why it is quoted as its own line rather than buried inside a square-foot rate.
Working Alongside Other Trades
On a tenant improvement the floor is usually last and is always the trade that gets squeezed. The realistic sequence is: ceilings and mechanical, then paint, then flooring, then base and final clean. If the flooring crew is brought in before the painters finish, the floor gets walked on and the punch list grows.
We would rather be told the handover date at the estimate stage than discover it two weeks before. It is the one input that decides whether a material can be ordered in time.
Specifications, Samples and Submittals
If an architect or a landlord has already specified a product, we will quote against that specification. If nothing has been specified, we bring samples and help choose something that meets the traffic, the lease conditions and the budget.
For property managers and GCs we can supply product data, physical samples for approval, and written scope descriptions. Where a certificate of insurance or a W-9 is needed before mobilising, ask at the estimate stage and it arrives with the quote instead of delaying the start date.
What We Need From You to Quote
Four things make a commercial quote accurate rather than provisional: the address, the measured or drawn square footage, whether the existing floor has to come out, and the date the space has to be usable. Access details — lift, loading dock, after-hours restrictions, parking for a van — come next, because they change the labour.
If you have drawings, send them. If you do not, we will measure.
Lead Times and Scheduling
Commercial carpet tile and LVT are ordered per project, so lead time is part of the price conversation rather than a footnote. A floor that arrives three weeks late is a different project: the tenant has moved in, or the handover date has passed. We quote lead time with the price so the programme can be built around it.
Handover, Punch List and Warranty
We walk the finished floor with you before we leave, and anything that needs correcting goes on a list rather than into a conversation. Installation carries a two-year labour warranty: if something we laid fails under normal use, we come back and correct it.
How Commercial Pricing Actually Works
Commercial flooring is quoted per project, by measured area, after a site visit. Product, substrate condition, removal, phasing, access and after-hours working all move the number.
What we do not do is publish a square-foot figure that ignores the state of the floor. On a commercial job the substrate and the removal are usually where the budget actually lives.
What Our Customers Say
One of the reviews left on our Google listing after a flooring installation.
“No pressure sales. Easy to work with. The install crew very nice and professional. Great price too. You deal with Keith the owner”
Rated 4.8 out of 5 from 56 reviews on Google.
Frequently Asked Questions
Do you work with property managers and general contractors?
Yes. We are licensed, bonded and insured, carry ROC 311107, and can work to a written specification or produce a scope for one.
Can the work be done outside business hours?
Yes. Evenings, weekends and phased areas are normal for commercial work, and they are priced into the quote rather than added afterwards.
Do you remove the existing commercial flooring?
Yes — tile and thinset, carpet, and vinyl, with dust-controlled equipment and containment, and the debris removed from site.
Can you supply product data and samples for approval?
Yes. We are an authorised dealer for the brands we install, so product data and physical samples come through us rather than a third party.
Can you handle a multi-unit turnover programme?
Yes. We price per unit against one agreed specification, which keeps a portfolio predictable as units turn one at a time.
How quickly can a commercial job start?
It depends on product lead time and access to the space. We give both dates — material and mobilisation — in the quote rather than a single optimistic one.
Do you carry insurance for commercial sites?
Yes, we are licensed, bonded and insured. Certificates for a property manager or a GC are provided on request at the estimate stage.
Do you offer financing?
Financing for larger projects is available through Acorn Finance and Lyon Financial.
Request a Commercial Estimate
Call or text 602-448-2899 to arrange a site visit, or send the address and the scope through the contact form. Our office is at 2828 N Central Ave, Phoenix AZ 85004, and we work across the metro — Phoenix, Scottsdale, Tempe, Chandler, Gilbert, Glendale, Mesa, Avondale, Peoria and Paradise Valley.
For residential work see flooring contractor, tile installation and dustless tile removal.